Smart UVC Water Disinfection System
Hyper Flux UVC740 /265nm

Make every drop of discharged cooling water clean enough to stand behind

Once cooling-loop or discharge water from an AI data center carries bacteria or sloughed pipe biofilm into municipal systems, compliance and reputation are on the line—and recycled water often carries higher microbial risk than potable supply. HyperFlux UVC 740 applies continuous 265nm UVC before discharge to inactivate bacteria and suppress wall biofilm, so every drop is clean and traceable with disinfection records ready for third-party review. A PDU drives up to three reactors; multiple PDUs daisy-chain over Ethernet so any unit can oversee the fleet and a single power loss does not stop the line—enough coverage for a dozen CDUs without a single point of failure. Get water right, and ESG plus discharge compliance already have an answer.

Read the full scenario →

Outbreaks often start in a drinking-water line

ASF or PRRS can wipe out a swine barn overnight; poultry houses face HPAI and Salmonella with the same stakes. Invisible biofilm in drinker lines is a pathogen reservoir and quietly undermines vaccine response and feed conversion. HyperFlux UVC 740 continuously disinfects each house’s independent water system—inactivating pathogens, suppressing biofilm, with zero chemical residues that would affect palatability or enter meat. Every disinfection event is logged for integrators and buyers. Clean water protects herd health and the economics of the whole farm.

One TOC spike can cost well over USD 100K per hour of downtime

In UPW distribution loops, organisms such as Ralstonia can seed pipe-wall biofilm; when it sloughs, TOC spikes follow—downtime can approach USD 125K per hour and millions per fab per year. Side-stream filters catch particles, not the film on the wall. HyperFlux UVC 740 applies continuous 265nm UVC on the distribution loop to prevent biofilm where filtration cannot, with live visibility and records of water and disinfection status. Protect TOC, and you protect yield and delivery.

Read the full scenario →

A tank of Atlantic salmon deserves the steadiest water you can give it

Land-based RAS Atlantic salmon can produce millions of dollars per site—and lose it overnight to viruses such as ISA or SAV, or to off-flavor compounds (GSM / 2-MIB) that force delayed harvest. HyperFlux UVC 740 delivers continuous high-dose 265nm inactivation and can work with ozone to break down off-flavors and speed depuration—cleaner flavor, earlier shipping, better price. The same platform also supports shrimp EHP and koi KHV control with zero chemical residues and visible disinfection performance. Premium fish deserve an uncompromising water barrier.

Read the full scenario →

Legionella needs about 10 mJ—your margin is nearly 50×

Cooling towers are high-risk for Legionella; an incident means public-health and regulatory exposure. Traditional dosing never stops, burning both residual risk and cost. HyperFlux UVC 740 runs continuous 265nm UVC to damage cells and suppress wall biofilm—about 10 mJ/cm² for 4-log (99.99%) Legionella inactivation, while standard mode already delivers 479.2 mJ/cm² (~50× margin) and can boost to 584.6 when water quality worsens. Dose and water data stay on record—tamper-resistant evidence for audits, without last-minute paperwork.

Milk yield hides in the details—starting with a clean drink

Dairy cows drink large volumes every day. Lines and troughs stay wet, inviting biofilm and pathogens that can also blunt the effect of waterborne treatments. HyperFlux UVC 740 continuously disinfects farm drinking water with 265nm UVC—inactivating pathogens, suppressing biofilm, with zero chemical residues that would affect palatability or enter the milk chain. Disinfection logs support dairy quality audits. Clean water is basic to cow health and milk performance—and too often overlooked.

Want ozone for ambient WFI? Residual ozone is the hard part

Cold WFI and PW often rely on ozone to keep loops sterile, but residual ozone must be removed before use—too little risks patient safety; too much wastes energy and cost. HyperFlux UVC 740 uses 265nm UVC to both prevent pipe-wall biofilm and help destroy residual ozone—keeping ozone’s benefit while cutting its downside. It does not replace UF for endotoxin removal, but it preserves continuous, verifiable water and dose records for GMP audits. Clean is not enough—you must be able to prove it.

Disinfect without medicinal off-notes—honor the flavor

In craft beer and spirits, process water and CIP quality write themselves into the final flavor. HyperFlux UVC 740 continuously disinfects process water with 265nm UVC—inactivating spoilage organisms, suppressing biofilm, with zero chemical residues. Critically, it can break down chloramines that seed chlorophenol “medicinal” off-flavors—a problem chlorine or carbon alone rarely fix at the source. It treats process water only—never wort or must—so flavor risk stays zero. Clean water makes clean flavor and backs your promise to drinkers.